The Half-Staff, Half-Mast, and Mourning Ribbon DrillMaster Study

There is confusion about placing the American flag at half-staff, using a mourning ribbon, and a few myths. Let’s go over the facts.

• Staff = a flagpole on land.
• Mast = a flagpole on a ship at sea or on a Marine Corps, Navy, or Coast Guard installation or other nautical location.
• Halyard = the rope used to raise and lower the flag.

Never fly a fringed flag on an outside stationary or mounted (on a wall or post) flagpole. These flags are only for the color guard flagstaff. See this article for information.

This article is reworked and republished August 26, 2024. It originally was published July 16, 2012.

The Order to Fly at Half-Staff

See also the Redundancy of State Orders to Half-Staff.

Most often the President will order all flags to half-staff for a national tragedy. Governors also have the ability to order flags to half-staff for their state. In the case of the governor, he/she can order state flags only to half, but this would be specified in the order. Most often, when a governor gives the order, it is for the American flags in the state.

Many countries fly their flag at half-staff as a sign of mourning. Here are the established times for the American flag.

• For thirty days after the death of a current or former president or president-elect.
• For ten days after the death of a current vice president, current or retired chief justice, or current speaker of the House of Representatives.
• From the day of death until interment of an Associate Justice of the Supreme Court, a secretary of an executive or military department, a former vice president, or the governor of a state, territory, or possession.
• On the day of death and the following day for a Member of Congress.
• On Memorial Day until noon.
• Upon presidential proclamation.
• Peace Officers Memorial Day (May 15), unless that day is also Armed Forces Day.
• Pearl Harbor Remembrance Day (December 7).
• Patriot Day (September 11).
• The first Sunday in October for National Fallen Firefighters Memorial Day

4 U.S.C. § 7(m) was modified by President Bush in 2007 requiring any federal facility within a region to honor a member of the U.S. Armed Forces who died on active duty.

The Flag Code states that the flag will be raised to full truck from half-staff the day after a certain government official’s death. The time is different for different officials. Read US Code Title 4, Chapter 1, The Flag Code, here.

How to Fly the Flag at Half-staff

Raise the flag as normal quickly to the top with smooth, continuous motion of pulling the halyard or turning the crank and then slowly lower to half-staff with the same smooth motion. To be as accurate as possible, count the number of pulls of the halyard or turns of the crank it takes to raise the flag to full truck. Then, lower it by half of that number.

When the flag is ready to come down, raise it smoothly and quickly to the top from half-staff and then lower it smoothly and slowly all the way down.

The flag is lowered to the center of the height of the flagpole and the center of the hoist (height) of the flag. This is why only the American flag is displayed at half-staff/mast.

Only The American at Half

What you find in the Flag Code is that the American flag is brought to half-staff. No other flag, on the same halyard, is mentioned. The center of the American flag should be at the center of the pole. If another flag was underneath, a state flag, for example, it would be too low.

So, the information about another flag on the same halyard in this instance isn’t missing from the Code, as we might think (I once did), it’s just that only the American flag is brought to half-staff.

This does not mean that flags on another halyard on the same pole or on a different pole are not brought to half-staff. This is only about the American flag and another flag on the same halyard.

The Mourning Ribbon

At right is a photo of a flag flown from a pole projecting from a Boston Fire building. Notice that this pole has a halyard and that the flag is at half-staff. This is because of the halyard. Flags mounted on poles without a halyard that project from a building are not adjusted to half-staff, a mourning ribbon is attached.

The Mourning Ribbon on a Flagstaff

A quote from AR 840-10. “h. Placed in mourning. Flags carried by troops will not be placed in mourning unless ordered by the President or the Secretary of the Army. When so ordered, a streamer of black crepe 7 feet long and 1 foot wide will be attached to the staff at the center of the streamer immediately below the spearhead of the U.S. flag and the organizational flag (see fig 2–9).”

MCO 10520.3. “4. Placing of the National Flag in Mourning. Flags carried by troops will not be
half-staffed, nor will any such flag be placed in mourning unless ordered by the Secretary of the Navy. When so ordered, two streamers of black crepe 7 feet long and about 12 inches wide will be Attached to the staff blow the ornament of the national and organizational color and standard.”

MCO 5060.20. “h. When the organizational colors are draped in mourning, the mourning streamer shall consist of a black crepe streamer seven feet long and about 12 inches wide. A bowknot, the loops of which are six inches long, is tied in the center. This knot attaches the streamer to the upper ferrule, just below the spearhead. If a streamer attachment set is used, the bowknot will be tied on the upper ferrule below the streamer attachment set in a manner so as not to disturb the natural hang of the unit’s battle streamers.”

From Chapter 12 of US Navy Regulations, “If the deceased was a flag or general officer, or at the time of his or her death, a unit commander or commanding officer of a ship, the appropriate personal flag or command pennant, or commission pennant, shall be draped in mourning and carried immediately in advance of the body in the funeral procession to the grave.”

NTP 13(B) Chapter 9. “c. In the event the deceased was a flag officer, a unit commander, or the commanding officer of a ship, his personal flag, command pennant or the ship’s commission pennant shall be draped in mourning and displayed at half-mast from a staff in the bow of the boat carrying the body. The manner of draping these flags or pennants in mourning shall be the same as that prescribed for draping the national ensign in mourning. (See Chapter 2).”

NTP 13(B) Chapter 2. DRAPING THE NATIONAL FLAG IN MOURNING
When authorized by the President, the national flag shall be draped in mourning in the following manner: A black streamer, the length of which should be approximately one and a half times the fly dimension of the flag to be draped, is tied at its center around the ferule just below the battle-ax leaving two 6 inch loops or bows near the knot. The width of the streamer should be proportional to the size of the flag to be draped, up to a maximum of 12 inches. The loose ends of the streamer are allowed to fall free.”

The ribbon is authorized on a staff, you just probably have not seen it. If it is used, it’s rare except for the US Navy Ceremonial Guard in Washington DC.

Who Can Use the Mourning Ribbon?

For the military, only the Army and sea services (Marine Corps, Navy, and Coast Guard). The Air and Space Forces cannot.

The military must follow the size restrictions while civilians can use whatever length and width they would like. Guidance for civilians for the mourning ribbon from vexillologist DeVaughn Simper is to measure the hypotenuse of the flag for the length and 4″ for the width.

“Half-Staff”

There is a popular video showing a man moving his flag from the horizontal position, what he calls, “Half-staff”, up to the proper position at an angle. This is my wife’s and my flag display below showing the ridiculousness of the concept. Placing the flag at horizontal is NOT half-staff, it’s inappropriate. The position is for any other flag except a foreign national.

All of the Flags at Half-staff?

Yes, and no. State flags are given the same consideration in each state as the American flag. Our Founding Fathers gave the term “United ‘States'” to all of the territories which was shocking back then since “state” means a nation. Each American state has its own laws concerning their flag. Here is information concerning Maryland’s flag laws as an example.

The graphics below show all three flags lowered to half-staff with the poles at the same height and with the national pole taller. “The American flag must always be higher” is a myth!

But the American flag is lower than the other flags in this picture!

Take some deep breaths, you’re missing the point here. Not all countries have to lower their flags and not all flags must be at the same height all of the time. This 1968 photo, courtesy of John Wright, is from the Vietnam war. The picture is from when Dr. Martin Luther King, Jr. was assassinated. It was not necessary for any other country to lower their flag. This situation is proper. As of 2025, the conventional thinking (I’ll not call it “wisdom”) is to remove the flags from the other poles. That’s a bit silly since we know what mourning is about.

When the President orders flags to half-staff, overseas military installations must lower the American flag as a sign of mourning. The host nation’s flag is not automatically brought to half-staff unless the host nation liaison says otherwise. The point here is not getting worked up over something that is relatively trivial. Don’t just think you know the rules, read them and have them ready as a reference.

Other flags Lower and the American Flag at Full Truck

There is no reason for the state flag here to be at half-staff unless the governor specifically said that state flags will be flown at half-staff. Otherwise, all flags must be flown at full truck (the flat piece at the top of the pole). Do not fly other flags at less than full truck, all the way at the peak. That is inappropriate. The American flag is not supposed to always be higher than other flags.

c. A flag in any position below the peak (the top of the mast or truck) is technically in the half-mast position but, in general, the middle point of the hoist of a flag at half-mast should, in the case of an unguided mast of one piece, be halfway between the peak and the foot of the mast or, in the case of a mast with a yard or guys, halfway between the peak and the yard or point of attachment of the guys (See Figure 2-1) . Local conditions, such as the liability of fouling the flag may however, dictate other positions, a graceful one being with the top of the flag the depth of the hoist below the peak.

MCO 10520.3 (2013) Chapter 2, para. 2.

Flag Position on the Nautical Mast

Nautical displays have looked complicated to me since I served 20 years in the USAF and had no need to learn about the mast and it’s various displays. However, that has changed.

When flown from the gaff, the Ensign is lowered so that the center of the hoist (center stripe) of the flag is aligned with the yardarm. The national ensign here with the pennant at the top is not flown in a disrespectful manner, please see the bottom of this article to help understand nautical flag display.

When the National Ensign is flown from the topmast at full truck, it is lowered just like on any other flagpole when it’s a single halyard mast. On a double-halyard mast, the Ensign is flown from the right (starboard) side and lowered just the same.

Though technically, half-mast is any point lower than full truck, the standard for half-mast is half-way between full truck and the cleat. In all of my research Yardarm = Crosstree. It’s possible that an argument could be made for a separation of identifying the Yardarm and Crosstree like the image below.

(The following is from an external source currently unavailable). The gaff-rigged pole had its origins at sea. Because of all the sail carried by the rigging of these vessels, the flag of a nation could not be clearly viewed if it was placed at the top of the mast. The stern of the vessel was the position of command and the captain’s quarters were located aft. Early boats also had the nobleman’s banner, king’s banner, or English ensign staff fixed to the stern rail. As sails changed, long booms sweep across the stern rail every time the ship tacked, so the ensign staff had to be removed when the ship was under way. Since the captain and other officers were still aft, the nearest position from which they found it practical to fly the ensign was the gaff. Over time, this became the place of honor to display the national flag. When the ship was moored, the ensign staff was set up again on the stern rail.

This was the practice in the eighteenth century, when the U.S. Navy was created. Now that warships are made of steel and the signal mast no longer carries a boom, our navy still flies the ensign at the gaff peak when under way and at the ensign staff when not underway. There is no law specifying how a flag should fly on a gaff-rigged pole, instead it is based on long standing nautical tradition.

The usual argument given by those that think it is wrong to fly the national ensign from the gaff is that the national ensign is flying below a club burgee or other flag contrary to the Flag Code. Notice that even when the national ensign is flown from the stern of a ship, it is lower in height than other flags flying on the ship. When the ensign is flown from a gaff-rigged pole, a flag flown at the top of the mast is not considered above the ensign because it is not being flown directly above the ensign on the same halyard.

United States Power Squadrons, has created an exemplary resource here. There is also Sailing Issues with some great nautical flag etiquette here. Be familiar with MCO 5060.2, Drill and Ceremonies, Chapter 7; and [US Navy] NTP 13(B), Flags Pennants, and Customs, both available for download on the Resources page.