You can see that the rifles in this picture (Glendale DrillAmerica M1s) are rotating on the X and Y axes due to poor technique
Remember, colorguard (color guard) = a marching band color guard.
What’s the difference between a colorguard rifle toss and a military Driller’s rifle toss? Nothing. The mechanics are the same. “We Drillers catch differently.” Yes, I’m aware of that and catching the rifle when it is upside down looks bad and that’s not because I have guard experience, either.
The Colorguard Rifle Toss
By Fran Hunt Simmons, DrillMaster guest author
This article discusses basic rifle tosses, from single to quad. It assumes that the reader has had at least a little instruction in tossing a rifle, knows the parts of the rifle, and understands the positions of left flat and right flat. This article does not claim to cover every nuance of tossing, or describe the “only” or “right” way to do rifle tosses.
Getting Started
Stand in a stable position. I like second position “boxed out” (stand like at Parade Rest) for practice. Feet are apart, shoulder width. Start with the rifle at left flat. The left arm is bent, elbow free of but in line with the ribcage, with the left pinkie barely to the left of the bolt. I like to let the thumb ride along the very bottom edge of the barrel but it is tucked down, not extended. Keep the rifle in your fingers, not in the palm of your hand. This reduces twisting on the release. The right elbow is 6-8” out, in line with the body, forearm straight. The right hand rests lightly at the very end of the gun with no fingers overlapping. Keep elbows higher than wrists. Stand with shoulders back, stomach in, feet shoulder width and legs turned out. Relax from head to toe; nothing twisted or tilted. Have enough tension in your shoulders, back and arms to keep someone from taking your rifle away. Check again when it’s time to boost (aka dip – I don’t like “dip” because it implies lowering the hands and neither hand should drop).
The Boost (Hit)
My groups don’t boost for a single. But for doubles and up: Raise the right hand to shoulder height. Separate your shoulders. Don’t grip the bottom hand too tightly. Don’t dig your elbow into your ribs. That can ruin arm path, slow down rotations, and, if you do it on the catch, it’s very ugly because your body will contort around the rifle. When you are set, look down at the rifle and make sure that your hands are in a straight line, and that the rifle is not rotated towards or away from you. Usually the culprit is too much tension in your fingers. Any line on the floor can be used to check your position. This helps improve rifle pitch.
Break it Down
There are four parts to a toss: push, lift, release, catch.
Exercises: These are some exercises for Rifle Tosses.
Sgl: Spin, spin, stop, wait, Re – LEASE! & 2 (hold, push 8)
Dbl: Spin, spin, stop, hit, Re – LEASE! & 2 AND
Triple: Spin, spin, stop, hit, Re – LEASE! & 2 & 3
Quad: Spin, spin, stop, hit, Re – LEASE! & 2 & 3 AND!
Catch on either the count or half count (but don’t stop counting). Push on 8 to restart the exercise (at spin, spin). For singles and doubles, you can count 1-8 continuously. For triples and quads, count 5, 6, 7, 8 in between for a breather. If your hands are sore, switch hands on 1 & 3 (boost 4) instead of spinning and stopping. For variation, try catching at angles, vertical or with creative free hand positions/action. Or try catching in different body positions.
About Technique
I hope you enjoyed this article! These techniques have helped my teams over the years. I learned them from my instructors, & supplemented with WGI equipment technique tapes. If you’re already on a team, go with the techniques your team uses so you will adhere to your team’s style. If what works for me doesn’t work for you, please write me. I’d love to hear what others do or what might work better. If you want to contribute an article to be posted in our Instructor’s Resources section, please contact me. Good
luck, competitors!
Fran Hunt Simmons
And there’s more:
http://www.youtube.com/watch?v=uBXxBKu6kf0
I speak with law enforcement officers and firefighters around the country on all matters of…
Commanders for Parade Staff, Flag Detail, and Color Guard, do not come to Attention (from…
In this clip from the 1962 TV show "I've Got a Secret", Jonathan Winters marches…
What a great day! Too bad other schools don't join in on the learning! Atlantic…
Recently, I received a question that deserves to be an article. This happens constantly and…
Pearls are expensive and fairly rare. That's why cultured pearls came about. A pearl is…
This website uses cookies.
View Comments
Just wanted to say that this article is written based on the physical mechanics of dealing with a less than 3 pound rifle. With a heavier rifle you're going to have to really support with your core but also with significant upper body strength. So you have to do your PT if you want to achieve that double, triple and quad. The mechanics of the push are different: start with your hand on the butt so you can get all the extra leverage possible; tighten your core and push as hard as you can straight down. On the lift you will feel the opposite side of your body take control of the rifle and you will again tighten with your core to support your shoulder and back muscles. Good technique will protect you from injury - especially keeping the rifle in your bent fingers and NOT in the palm of your hand... the deeper that rifle is in your hand the more risk of wrist injury from twisting. For the free hand after release, military drill standard seems to be a salute hand at the point of release, though from what I see at drill meets this detail is often neglected. Lastly, I can understand why drillers like to catch at the vertical instead of flat - stopping a fast moving heavy rifle takes skill and strength. However - consider this please, Drillers - Maybe you can think of it as a two-part process: "catching" with technique at flat, and "stopping" it at the vertical on purpose to soften the blow. At any rate, you have to have a well-considered method that all your teammates use if you want anything resembling precision. Best of luck to all the competitors!
Thank you, Fran! Articulated well as always.